Teach exchange feeder bank magazine zero points

In this chapter you will learn how to teach the exchange feeder bank magazine zero points.

Note: The machine origin is the reference point for all exchange feeder banks. The feeder bank's address tells the system the coarse position of the feeder bank. To precisely locate the feeder bank you need to teach two points of each bank. Additionally you must define the relation between feeder bank zero point and slots.

First you must measure the machine origin.

Second you must measure the feeder bank(s) zero point(s).

Starting point is the main menu.

Press then and finally to open the following window:

1 - Select the feeder bank(s) where you want to teach the slot zero points

2 - Counting method in each feeder bank segment is left-to-right. Enter the slot number here

3 - Measure the slot zero point without changing it

4 - Teach the slot zero point (change it)

5 - Auto-teach-mode - the head camera moves (coarsely) to the position of the slot zero point. Then the camera measures the exact position of the zero point. Press "enter", to proceed to the next slot.

Teach the slot zero points using zero point feeder (feeder no. 4092).

The process is quite similar to teaching magazine/slot origins for machines without exchange feeder bank.